0102030405
Handheld Fiber Laser Welding Machine
Equipment Introduction
This device has the following advantages:
? Good beam quality, high energy, suitable for high-speed and high-precision welding
? Suitable for welding small volume and multi angle sheet metal and hardware parts
? Compact size, smaller occupied space, achieving portability
The manual laser welding machine is lightweight and compact, saving space and facilitating transportation compared to lamp pumped solid-state laser welding machines. The laser transmission fiber can reach up to 15m, which can adapt to the requirements of changing processing locations and achieve product portability.
? Compact size, smaller occupied space, achieving portability
The manual laser welding machine is lightweight and compact, saving space and facilitating transportation compared to lamp pumped solid-state laser welding machines. The laser transmission fiber can reach up to 15m, which can adapt to the requirements of changing processing locations and achieve product portability.
? Stable laser output power and high equipment reliability
Energy fluctuations below 2% ensure stable laser welding quality. The average usage time of laser pump sources can reach over 50000 hours, which is about 100 times that of lamp pumped laser welding machines.
? High efficiency, low energy consumption, and cost savings in usage
The electro-optical conversion efficiency is as high as 30%.?
The average energy consumption is about 1/10 of the ordinary welding machine. It can save users a lot of energy consumption expenses for long-term using.
Application areas
The handheld manual fiber laser welding machine is widely used in thin stainless steel, galvanized sheet and iron sheet metal welding, such as mechanical chamber, electrical control and distribution box, kitchen ware, bathroom ware, stainless steel household industries, elevator, shelf oven and other products.
Technical parameters
| Equipment model | FRZ-1500 | FRZ-2000 | FRZ-3000 |
| Average output power(W) | 1500W | 2000W | 3000W |
| Laser Source | Continuous Fiber Laser | ||
| Laser mode | Single mode | Single mode | Multi mode |
| Cooling mode | Water cooling | ||
| Min weld seam | 0.2mm | 0.2mm | 0.2mm |
| Shielding gas | Argon, Nitrogen | ||
| Welding gun weight(Kg) | 0.7 | ||
| Equipment size(mm) | 110*50*90 | 110*50*90 | 120*65*100 |
| Fiber length | 10m、15m(Optional) | ||
| Power supply | AC220V, 50Hz | AC220V, 50Hz | AC380V, 50Hz |
Samples pictures
Cupboard
Door
